BIG-BOY Airbrush Co.
Some facts about our painting methods
1) Every Paint job is sanded flat (blocked) and primer sealed if needed.
2) 2 coats of adhesion promoter /sealer is applied to ensure a good bond of base and clears.
3) Base coats are then applied. This is where the magic starts. Special effects and coatings to give your paint a unique effect. The base coats are then sealed with a mid coat clear.
4) Followed with graphics designs, airbrushing, art work, stripping, additional colors, transparencies, pearls, candies, etc. required to obtain your custom ordered designs
5) Minimum of 4 coats of Mid to High Solid Clear coats are applied over all work, murals, stripping etc., to seal everything in, leaving coats of clear to protect the complete paint job. If needed another 3 coats of clear maybe added after flat wet sanding prior clear in order to bury graphics.
6) Then the final clear coat is finished with a 4 step wet sanding process, from 1000 grit paper and ending with a 3000 grit paper.
7) Completing the job is done by using a 3 step polishing process to give an unbelievable mirror like finish
Our Paint lines: We use the following brands of automotive finish systems for different applications.
Base Paints : The following paint products are used for our base colors
RM/ Diamont – Limco – PPG – Metalux – Medallion
The following clear coat product lines are used:
Medallion Clear Coats
Alpha 6 Striping Enamels
1 Shot Striping Enamels
Kustom Creative Urethane Striping Paints
Acrylic water based art Paints by:
Big Boy Airbrush Co. 2022